P.D.I ( Pre Despatch Inspection)
This basic service includes set up and correct adjustment of brakes, gears and all moving parts. All bolts are torqued to manufacturers specification. This will ensure safety of the bicycle. Replacement parts extra
This Intermediate Service includes the above actions as well as inspection for wear and damage of all parts. Bicycle cleaned and degreased. Adjustment of bearings, Cleaning and re-lubrication of drivetrain components. Wheel Truing, Gear cables will be fitted FREE of charge. Recommended every 6 months. Replacement parts extra.
This Full Service includes all the above actions but we start by stripping the bicycle down to its individual parts. Frame alignment is checked . Bottom bracket ,headtube faced and aligned. Hydraulic brakes drained and re-bled. All parts individually de-greased and re-lubricated then refitted to the frame using manufacturers recommendations. Once the bike is complete we will then fit the customer to the bike making sure contact points ( Handlebars, Stem, Brakes, Saddle etc) are adjusted to ensure optimum efficiency. Recommended every 12 months. Replacement parts extra.
Fork Lower Service From
This service includes removal of the lower part of the fork and replacing dust wiper seals. Cleaning of lower parts and re-lubrication using manufacturers recommended parts. Replacement parts extra.
Full Fork Service From
This service includes the actions as above along with complete di-assembly of all internal parts. Cleaned and inspected for wear and tear and re-assembled using manufacturers recommended parts. Fork re-installed to bicycle and rider set-up performed. Replacement parts extra.
Rear Shock Air Sleeve Service From
This service includes air pressure recording and depressurisation. Once this is achieved we remove the outer air sleeve and inspect seals for wear and tear. Re-lubrication using manufacturers recommendations. Re-pressurization to original recording. Re-installed onto bicycle and rider set-up performed. Replacement parts extra.
Set up of brakes front or rear adjusting to ensure optimum efficiency. Checking system for wear and tear. Replacement parts extra
Re- Bleed system front or rear with manufacturers recommended fluids. Checking for wear and tear and ensuring system is adjusted for optimum efficiency. Replacement parts extra.
Derailleur/ Gear Service
Fully adjust and set up of either front or rear derailleurs. Complete lubrication and inspection for wear and tear.
Fork fitted to bicycle by cutting of steerer tube an fitting of relevant parts. Parts extra.
Removal of original bottom bracket. Cleaning of all surfaces and checking for alignment. Fitting of new component to manufacturers specifications. Replacement parts extra.